Additional Images
(click to enlarge)
)
)
)
MECH-Q Mechanical
The Mech-Q Mechanical
module includes a comprehensive range of mechanical symbols, fasteners, gears,
material handling items (conveyor rolls, sprokets, Trajectory calculator..),
springs, shafts utility and many more! Most modules draw in 2D or
3D.
Mech-Q works with all versions of AutoCAD (R14 to 2011), AutoCAD LT
(2004-2011), AcceliCAD & IntelliCAD
MQ-Version
Compatible
BOM
3D
AutoCAD
ACLT 2004+
AcceliCAD
IntelliCAD
Tools include:
-
Global Text manipulation
-
Style Changing: a
powerful utility to change text from one style (or all styles) to another
-
Text Find and Replace: searches
for all instances of a nominated text and replaces it as specified
-
Text Box: draws a box
around selected text line or paragraph
-
Width: changes the
width factor of selected text
-
Scale Globally: changes
the height of text to a new height or scaled by a given factor
-
Underline
-
Layer control by
pointing to an entity of desired layer
-
Locking
-
Unlocking
-
Changing
-
Freezing
-
Isolating: freeze
entities on all layers except the entities on the layer selected
-
Bolts and Screws,
Hexagon Head Bolts, Socket head, Flat head, Button head, C'Sunk Pan Head,
Raised Head Washer Bolts, Shoulder Cap Screws and Studs. Metric & English
sizes
-
Nuts Regular Hex. Class 9, Thin,
Washer and Lock nuts. Metric & English sizes
-
Flat Washers
-
Spring Washers
-
Set screws Cone, Half Dog, Flat
and Cup Point. Metric & English sizes
-
Dowel & Roll Pins
-
Bolt Holes to
correspond to Bolts and Screws
-
Slotted Holes
Mechancial
Module
This module includes modules: MGD01;
MFT01 plus the following powerful utilities:
-
Bearings & Bearing Housings
Also available separately as Module: MBR01 This includes: Deep Groove
Ball, Cylindrical, Self Aligning, Spherical Roller, Thrust, Taper Roller &
Y Bearings, Plus: Bearing Housings, Plumber Blocks and Flange Housings
-
Auto Shaft Generator Draw:
Shafts/Pinions and internal (bore) plus an End view - with all Combinations of
shaft steps, chamfers and corner radii.
-
Keys & Key Ways Draws
Keys/Key ways - Standard or User Specified.
-
Internal Chamfer Generator
Simply pick the drawn bore end points and the chamfer is drawn, trimming lines
automatically.
-
External Chamfer Generator
By picking the shaft end line the chamfer is drawn - modifying the shaft end
entities as required.
-
Spur Gears Metric &
English sizes.
and more...
Material
Handling Module
This module is of special
interest to material handling engineers and drafting specialists. This
collection of powerful utilities include:
-
Conveyor Rolls & Idlers
Utility Various makes, including PROK and PRINCE, (Other makes by
request). The utility allows you to draw 3 Roll Troughs, Vee Troughs and Return
& Flat Carry Idlers. End, Front and Plan Views for all standard roller
diameter, Angles and Belt Width Now also: Suspended Idlers
-
Conveyor Chains Links &
Sprockets. This routine is based on the RENOLD Conveyor Chains range.
It will draw Sprockets Front view, End View and Chain Links. For all common
Chain pitch, Break Load (and Number of Teeth)
-
Transmission Sprockets Plus
Sprocket Design Utility . To ISO 606, 0.375-1.50" pitch. Front and End
views: Simplex, Duplex and Triplex Transmission Sprockets - In Steel & Cast
Iron Plain/Taper Bore
-
Bulk Material Trajectory
profile generator. Calculates and draws Bulk Material trajectory envelope for
conveyed material as it travels past header pulley.
-
and more...
-
Drilled Holes
-
and more...
Mech-Q works with all versions of AutoCAD (R14 to 2011), AutoCAD LT (2004-2011), AcceliCAD & IntelliCAD
| MQ-Version | Compatible | BOM | 3D |
| AutoCAD | |
|
|
| ACLT 2004+ | |
|
|
|
AcceliCAD |
|
|
|
| IntelliCAD | |
|
|
- Style Changing: a powerful utility to change text from one style (or all styles) to another
- Text Find and Replace: searches for all instances of a nominated text and replaces it as specified
- Text Box: draws a box around selected text line or paragraph
- Width: changes the width factor of selected text
- Scale Globally: changes the height of text to a new height or scaled by a given factor
- Underline
- Locking
- Unlocking
- Changing
- Freezing
- Isolating: freeze entities on all layers except the entities on the layer selected
This module includes modules: MGD01; MFT01 plus the following powerful utilities:
-
Bearings & Bearing Housings
Also available separately as Module: MBR01 This includes: Deep Groove Ball, Cylindrical, Self Aligning, Spherical Roller, Thrust, Taper Roller & Y Bearings, Plus: Bearing Housings, Plumber Blocks and Flange Housings - Auto Shaft Generator Draw: Shafts/Pinions and internal (bore) plus an End view - with all Combinations of shaft steps, chamfers and corner radii.
- Keys & Key Ways Draws Keys/Key ways - Standard or User Specified.
- Internal Chamfer Generator Simply pick the drawn bore end points and the chamfer is drawn, trimming lines automatically.
- External Chamfer Generator By picking the shaft end line the chamfer is drawn - modifying the shaft end entities as required.
- Spur Gears Metric & English sizes.
This module is of special interest to material handling engineers and drafting specialists. This collection of powerful utilities include:
- Conveyor Rolls & Idlers Utility Various makes, including PROK and PRINCE, (Other makes by request). The utility allows you to draw 3 Roll Troughs, Vee Troughs and Return & Flat Carry Idlers. End, Front and Plan Views for all standard roller diameter, Angles and Belt Width Now also: Suspended Idlers
- Conveyor Chains Links & Sprockets. This routine is based on the RENOLD Conveyor Chains range. It will draw Sprockets Front view, End View and Chain Links. For all common Chain pitch, Break Load (and Number of Teeth)
- Transmission Sprockets Plus Sprocket Design Utility . To ISO 606, 0.375-1.50" pitch. Front and End views: Simplex, Duplex and Triplex Transmission Sprockets - In Steel & Cast Iron Plain/Taper Bore
- Bulk Material Trajectory profile generator. Calculates and draws Bulk Material trajectory envelope for conveyed material as it travels past header pulley.